建造及維修 / Construction & maintenance

裝修木工

Renovation Carpenter

已核對條目

裝修木工負責天花、地板、木門、傢俬同間隔,講求手工同現場判斷;冇法定牌照,但建造業議會工藝測試係行內公認嘅技能憑證。

建造及維修呢個行業係點運作

地盤工、水喉、木工、油漆、鋁窗、冷氣等工種。呢個行業靠工藝同年資:建造業議會同水務署各有註冊/訓練制度,學徒制(邊做邊讀)係最常見嘅入行通道,持牌水喉匠更要向水務署註冊。工作體力要求高,安全訓練係開工前嘅硬性條件。

Site work and the wet trades — plumbing, carpentry, painting, window frames and air conditioning. This sector runs on craft skill and years on the tools: the CIC and the Water Supplies Department each run registration and training schemes, apprenticeship (learn while you earn) is the usual way in, and licensed plumbers must register with the WSD. The work is physical, and safety training is compulsory before you start.

睇晒呢個行業其他職業 →

工作性質 / Nature of the work

體力與手作 · 戶外及現場 · 技術與器材操作 · Physical and hands-on · Outdoors and on-site · Technical and equipment operation

呢份工嘅主要性質係:體力與手作 · 戶外及現場 · 技術與器材操作。以下逐項講清楚實際係點做。

  • 體力與手作Physical and hands-on

    靠雙手同身體完成工作:搬抬、切割、安裝、清潔或手工製作,多數要長時間站立、走動或用力。

    The work is done with your hands and body — lifting, cutting, installing, cleaning or crafting — usually with long hours standing, walking or exerting force.

  • 戶外及現場Outdoors and on-site

    主要在戶外、工場、船隻或客戶現場工作,要適應天氣、噪音、污漬或狹窄環境。

    Mostly outdoors, in workshops, on vessels or at client sites, so you work with weather, noise, grime or confined spaces.

  • 技術與器材操作Technical and equipment operation

    要熟習特定機器、儀器或系統,按程序操作、檢查同排除故障;做錯步驟會直接影響結果。

    You need to know specific machines, instruments or systems: operating, checking and troubleshooting them to procedure, where a wrong step affects the result directly.

工作性質係本站按工作方式歸納,唔係官方職業分類(政府統計處另有《標準職業分類》);只講對人、對機器、 戶外、輪班、自由身等形式,唔代表薪酬、學歷或年資要求。

繁體中文

日常工作

睇圖同度尺係第一步:確認尺寸、門向、櫃內間隔同收口方法,再開料、做底層(例如英泥砂漿或木方)、安裝同收口。完工後要檢查平整、開關順暢同飾面無花,並按需要同設計師或業主即場調整。

入行與技能認證

入行冇法定牌照,多數由學徒或木工助手做起,邊做邊學;亦可先讀職業訓練局木工/室內裝修相關課程,再考建造業議會工藝測試(木工)確立技能水平。喺地盤工作同其他工種一樣,要持有建造業工人註冊證同完成認可安全訓練。

薪酬與晉升

薪酬由僱主按日薪、件工或月薪決定,冇統一薪級;自僱接單就按報價扣物料同人工成本,收入同開工日數同工程數量掛鈎,所以本站唔估算收入。路線係學徒/助手 → 木工 → 師傅 → 裝修工程負責人,亦可以專做訂造傢俬、展覽佈景或文物修復木工。

English

Day-to-day work

Reading drawings and measuring come first: confirming dimensions, door swings, cabinet layouts and how joints will be finished, then cutting, preparing the substrate, installing and finishing. At handover the carpenter checks that surfaces are level, that doors and drawers run smoothly and that finishes are unmarked, adjusting on the spot with the designer or owner as needed.

Entry and skill certification

No statutory licence is required; most carpenters start as apprentices or helpers and learn on the job. Another route is a Vocational Training Council carpentry or interior fitting-out course followed by the Construction Industry Council trade test for carpentry, which establishes the skill level. As with other site trades, a registered construction worker card and recognised safety training are required on site.

Pay and progression

The employer sets day rates, piece rates or monthly pay, with no single scale; those working for themselves deduct materials and labour from the quoted price, so income follows the number of working days and jobs, and this site prints no estimate. The route runs apprentice or helper, carpenter, tradesman, then renovation project lead, with scope to specialise in custom furniture, exhibition set building or heritage joinery.

薪酬由邊個決定

無法定薪級,多為日薪制。日薪由僱主或判頭按工種、手工要求及開工日數決定;自行接案者按報價扣成本。本站不估算收入。

No statutory pay scale; most work is paid by the day, with rates set by the employer or subcontractor by trade, standard of finish and days worked; contractors quote per job and bear their own costs. This site prints no income estimate.

入職條件 / Entry

  • 冇法定牌照;僱主一般要求相關經驗或工藝測試證明
  • 建造業議會工藝測試(木工)為業界認可資歷
  • 可先讀 VTC 木工/室內裝修相關課程
  • 地盤工作須持建造業工人註冊證及完成認可安全訓練
  • No statutory licence; employers normally ask for relevant experience or trade test evidence
  • The Construction Industry Council carpentry trade test is a recognised credential
  • A VTC carpentry or interior fitting-out course is a common way in
  • On site, a registered construction worker card and recognised safety training are required

升學路徑 / Study routes

可以多於一條。每條都註明來源,不是「唯一正確讀法」。

學徒/助手 → 工藝測試

Apprentice or helper → trade test

  1. 跟師傅做假天花、地板同傢俬安裝
    Work with a tradesman on ceilings, flooring and furniture installation
  2. 讀 VTC 木工或室內裝修課程
    Take a VTC carpentry or interior fitting-out course
  3. 通過建造業議會木工工藝測試
    Pass the CIC carpentry trade test
  4. 累積經驗後自行接單或升任管工
    Take on jobs independently or move up to foreman with experience

升遷 / Progression

視乎僱主,沒有單一官方階梯。

  1. 學徒/助手
    Apprentice / helper
  2. 木工
    Carpenter
  3. 師傅
    Tradesman
  4. 裝修工程負責人
    Renovation project lead

薪酬政策:只有官方薪級表、條例或監管機構公布的數字才會在本站寫出;私人機構薪酬因僱主而異,本站不估算。

同一行業嘅其他職業

建造及維修 · 4 of 27

核對時點 2026-09-14。招聘條件以當時廣告為準。

來源 / Sources

返回升學就業目錄